4066 CMOS Quad Bilateral Switch Intended

Free Delivery
Cash on Delivery is only available in Jordan
Ex Tax: $2.00
Brand: Twins Chip
Product Code: CMOS
Availability: 100

Available Options


4066 CMOS Quad Bilateral Switch Intended


The CD4066B is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals.
It is pin-for-pin compatible with the CD4016B, but exhibits a much lower on-state resistance. In addition, the
on-state resistance is relatively constant over the full signal-input range.


15-V Digital or ±7.5-V Peak-to-Peak  Switching
125-Ω Typical On-State Resistance for 15-V Operation
Switch On-State Resistance Matched to
Within 5 Ω Over 15-V Signal-Input Range
On-State Resistance Flat Over Full
Peak-to-Peak Signal Range
High On/Off Output-Voltage Ratio: 80 dB
Typical at fis = 10 kHz, RL = 1 kΩ
High Degree of Linearity: <0.5% Distortion
Typical at fis = 1 kHz, Vis = 5 V p-p,
VDD − VSS ≥ 10 V, RL = 10 kΩ
Extremely Low Off-State Switch Leakage,
Resulting in Very Low Offset Current and
High Effective Off-State Resistance: 10 pA
Typical at VDD − VSS = 10 V, TA = 25°C
 Extremely High Control Input Impedance
(Control Circuit Isolated From Signal
Circuit): 1012 Ω Typical
 Low Crosstalk Between Switches: −50 dB
Typical at fis = 8 MHz, RL = 1 kΩ
Matched Control-Input to Signal-Output
Capacitance: Reduces Output Signal
 Frequency Response, Switch On = 40 MHz
 100% Tested for Quiescent Current at 20 V
 5-V, 10-V, and 15-V Parametric Ratings
 Meets All Requirements of JEDEC Tentative
Standard No. 13-B, Standard Specifications
for Description of “B” Series CMOS Devices

Analog Signal Switching/Multiplexing:
Signal Gating, Modulator, Squelch
Control, Demodulator, Chopper,
Commutating Switch
Digital Signal Switching/Multiplexing
Transmission-Gate Logic Implementation
Analog-to-Digital and Digital-to-Analog Conversion
Digital Control of Frequency, Impedance,Phase, and Analog-Signal Gain


Write a review

Note: HTML is not translated!
Bad           Good